AQUASTOP® II lab. cooling water monitor, flow /temperature measurement

For monitoring cooling water flow and temperature in the laboratory. For installation in apparatus that runs without permanent supervision. Power supply and water supply are cut off in case of irregularities or when the preset temperature limit is exceeded.

Application:

• If the flow rate drops below the preset minimum level, the solenoid valve shuts off the coolant supply and connected electrical device (e.g. heating mantle) is de-energised.
• If the maximum temperature is exceeded, the solenoid valve stays open, the apparatus continues to be cooled and the electrical device is de-energised.

The temperature at the coolant outlet is recorded by the internal NTC sensor integrated in the flow sensor. As an option, an external Pt 100 temperature sensor which automatically deactivates the internal sensor can be installed in a freely selectable position on the test set-up (if required, please order separately).

Features:

• 2-line LED display for simultaneous display of flow rate and temperature
• LED for switching status and alarm indication
• Freely selectable alarm limits
• Acoustic pre-alarm alerts user before final deactivation
• With Schuko socket on the back